ホーム　>　English

English

2024.02.07Pre-registration for INTERMOLD OSAKA 2024
INTERMOLD OSAKA(2024)/Die & Mold Asia OSAKA(2024)
April 17(Wed) – 19(Fri), 2024
Venue: INTEX OSAKA

We are now accepting pre-registrations for the “Intermold/Die & Mold Asia/Japan Metal Stamping Technology Exhibition 2024” to be held in Osaka this April!
Before visiting, please register your information in the Intermold official website, print out your visitor ID, and bring it with you on the day of your visit.

▼Click here for the pre-registration
https://www.intermold.jp/english/visitor/
2023.12.15INTERMOLD @ OSAKA & NAGOYA in 2024
INTERMOLD, one of the biggest exhibitions for die & mold producers and their customers is to be held from April 17 to 19 in Osaka, from June 26 to 28 in Nagoya in 2024.
We, JaDMA, hope sincerely that this event will be more and more fruitful without the limitation due to the COVID-19 pandemic as the organizer.
You will be welcomed not only as a visitor, but as an exhibitor. For more details, please refer to the official website: https://www.intermold.jp/english/
2023.12.13Conference with Brazil Die & Mold Industry Association
On November 29th, 2023, ABINFER, the representative association for Brazil’s die & mold producers, visited JaDMA’s office, at Yushima, Tokyo in Japan for a conference with us to exchange opinions and share respective business situation.
2023.12.13INTERMOLD NAGOYA in 2023
The exhibition, INTERMOLD NAGOYA, was held from June 21 to 23 in 2023 in PORTMESSE NAGOYA under JaDMA as the organizer.
We, JaDMA, also ran an exhibition booth, where about 100 die & mold producers could demonstrate their excellent skills and technology.
2023.12.13INTERMOLD@TOKYO in 2023
We, JaDMA, had its exhibition booth, which accommodated about 100 die & mold companies of its regular members, in the INTERMOLD TOKYO 2023, held from April 12 to 15 in TOKYO BIG SIGHT.
39,045 people visited the exhibition for the duration in total. We also thank you all for coming as the organizer.
2021.05.31INTERMOLD@OSAKA & NAGOYA in 2022

In 2022, the INTERMOLD exhibition is to be held at INTEX OSAKA from April 20 – 23 and at PORT MESSE NAGOYA in July 6-9. The official website is under preparation now.
2021.05.18The Online Exhibition “AFTER INTERMOLD2021”
The online exhibition “After INTERMOLD 2021” is held from 18th to 28th in May 2021. INTERMOLD 2021 was held at Tokyo Big Site exhibition hall last April and has about 11,000 visitors although it was held under the situation of the COVID-19 pandemic. This year, an online exhibition, as well as a real exhibition, is held for exhibitors to promote their products, services, and technics through the Internet because it is not so easy to meet people face to face under the situation of the COVID-19 pandemic.

Visit the website:https://online.intermold.jp/
2021.03.26INTERMOLD 2021 @Tokyo
INTERMOLD 2021 will be held at Tokyo from April 14-17 in 2021. Pre-registration is a must to participate in the exhibition because of COVID-19. We are happy for you to use URL for pre-registration.
https://www.intermold.jp/english/top/
2021.03.19“Japan meets German” meeting
JaDMA has learned a lot from Germany on the “Japan meets Germany” meeting which was held on March 19. We added the new page to the history of the Japanese and German die and mold industry. The German media,PERGLER MEDIA, also appreciated the meeting.
2020.06.30JaDMA delegates attended ISTMA AGM
JaDMA delegates attended ISTMA(International Special Tool and Machining Association) General Meeting which was held on 30th in June via the Zoom platform.
2020.06.10Cancel of INTERMOLD NAGOYA/ Die and Mold NAGOYA
INTERMOLD NAGOYA/Die and Mold Asia NAGOYA to be held in July was canceled because of COVID-19.
2020.06.05JaDMA AGM took place online
The most recent Annual General Meeting occurred online, via Zoom platform, on Friday, June 5th. Mr.KOIDE was re-elected as the Chairperson of JaDMA and the new BoD was elected at the meeting. They had the opportunity to interact, analyze, and discuss the Association’s strategy, initiatives, and upcoming events.
2020.03.10Cancel of INTERMOLD 2020/ Die and Mold Asia 2020
The organizer, Japan Die and Mold Industry Association, Japan Metal Stamping Technology Association and secretariat decided to cancel INTERMOLD 2020/ Die and Mold Asia 2020/ Japan Metal Stamping Technology Exhibition 2020 in Osaka.

We were planning to hold the show on April 15-18 taking measures for preventing the spread of COVID-19 according to the guideline by the Japanese government. However, as of today, the situation in April is still uncertain.

Under consideration for the health and safety to visitors, exhibitors and every staff who may concern in the exhibition, we decided to cancel the exhibition in April.

I really appreciate your understanding this cancellation, and sorry for the inconvenience on your preparation for the exhibition.
2019.08.31FADMA General Meeting 2019 held in Manila,Philippines
JaDMA delegates attended the meeting which was held from 27th to 30th in August 2019 in Manila, Philippines.
2019.08.281st Philippines district meeting held in Manila
The first Philippine district meeting was held on August 27 of 2019 in Manila, Philippines.
2019.06.23INTERMOLD 2019 / Die & Mold Asia 2019(TOKYO&NAGOYA)
Japan Die & Mold Industry Association(JaDMA) successfuly organized INTERMOLD/Die & Mold Asia Exhibition in Tokyo& Nagoya during the year of 2019.

INTERMOLD2019 April 17-20（Venue: TOKYO BIG SIGHT AOMI Exhibition Hall）

INTERMOLD NAGOYA June 19-22（Venue: PORTMESSE NAGOYA）

More information:Please check the post show report.

INTERMOLD/Die & Mold Asia is the the biggest exhibition on die & mold manufacturing technology in our country. INTERMOLD2019 have 462 Companies and Associations and total 983 booths and attracted about 50,000 visitors from domestic and overseas.
2019.03.12Courtesy Call by East China district die and mold association delegates
Chinese delegates from 11 Die and Mould Industry Association in East China district made a courtesy call on JaDMA on March 11 of 2019 at JaDMA tokyo office.
2018.06.17INTERMOLD 2018 / Die & Mold Asia 2018(OSAKA&NAGOYA)
Japan Die & Mold Industry Association(JaDMA) organized INTERMOLD Exhibition in Osaka& Nagoya during the year of 2018.

INTERMOLD OSAKA April 18-21（Venue: INTEX OSAKA）

INTERMOLD NAGOYA June 13-16（Venue: PORTMESSE NAGOYA）

More information:Please check the brochure and visit the website.

INTERMOLD/Die & Mold Asia is the the biggest exhibition on die & mold manufacturing technology in our country. This is the first time we organize INTERMOLD Exhibition in Nagoya. Nagoya district is located in the middle of Japan and know as the center of manufacturing in our country because the car industry-related and the airplane industry-relate companies such as Toyota and Mitsubishi are located.

So far,the Exhibiton has been held once a year and attracted about 50,000 visitors from domestic and overseas every year.
2018.04.14ISTMA General Meeting 2018 held in Zurich, Switzerland
JaDMA delegates attended the meeting which was held from 11th to 13th in April 2018 in Zurich, Switzerland.
2018.04.12FADMA General Meeting 2018 was held in India
JaDMA delegates attended the meeting which was held from 10th to 11th in April 2018 in Mumbai, India.
2017.11.2460th Anniversary Commemoration of JaDMA Foundation
We hold a ceremony to commemorate the 60th anniversary of foundation on 24th November in Tokyo. Over 300 guests took part in the ceremony and celebrated our memorial day.
2017.04.16INTERMOLD 2017 / Die & Mold Asia 2017(Tokyo)
Japan Die & Mold Industry Association(JaDMA) organized INTERMOLD 2017 / Die & Mold Asia 2017 at TOKYO BIG SIGHT from April 12 to 15.

INTERMOLD has been leading Japanese mold industry-related exhibition more than 25 years to showcase state-of-the-art mold and die-related technology in Japan.

Nowadays the manufacturing industry is globalized. We need a platform to offer companies with a global competitive advantage can deliver the latest technology and information, and execute active business communication.

INTERMOLD is making an aggressive approach to automotive parts,aircraft parts and electronics industries which work closely with molding industry. The show covers parts manufacturing and surface treatment as well as highlighting Additive Manufacturing and 3D printers as a Special Theme to promote a new business matching between exhibitors to visitors.
2017.03.09FADMA Annual General Meeting 2017 was held in Seoul, South Korea.
Mr. Makino, JaDMA Chairman(FADMA Vice Chairman), Mr. Kida, International committee chairman, and a secretariat staff attended the meeting which was held from 7th to 8th in March 2017 in Seoul in South Korea.
2015.12.25Taking part in the General Assenbly of ISTMA in Germany
One of the members of the Japan Die & Mold Industry　Association(JaDMA)’s international committee attended the General Assembly of ISTMA as an observer. The meeting was held in the city of Aachen(Germany) on November 12.

ISTMA stands for The International Special tooling & Machinig Association. It is the international association which consists of 19 special tooling　and machining Association throughout the world. Its member countries are Argentia, United States of America, Canada, Brazil, Czech Republic, Estonia, Finland, France, Germany, Great Britain, Hungary, Italy, Poland, Portugal, South Africa, Slovenia, Switzerland, Sweden and Turkey(alphabetical order).

ISTMA’s misson is to help national industry associations(like JaDMA) and their member companies achieve businesssuccess in the global economy through advocacy, networking, information, programs and services.

It is getting more and more important to create cooperative relationship with die and mold associations in the world to keep high international evaluation of the Japanese die and mold technology.
2015.11.09INTERMOLD 2016 / Die & Mold Asia 2016
We, Japan Die & Mold Industry Association(JaDMA) will organize INTERMOLD 2016 / Die & Mold Asia 2016 which is the biggest exhibition on die & mold manufacturing technology in Japan from 20-23 April, 2016 in Osaka, Japan.

The Exhibiton is held once a year and attracts so many visitors from domestic and overseas every year. About 50,000 visitors will be expected in the next exhibition. The Exhibiton will create the opportunity to find new business partners.
2015.09.29Meeting with Portuguese delegation team
The delegation team from Portugal Die & Mold Industry Association(CEFAMOL) made a courtesy call on JaDMA on 7th Sep 2015. And JaDMA extended a warm welcome to them.
2015.06.24FADMA Annual General Meeting was held in Bankok Thailand.

Mr. Makino, JaDMA Chairman, Mr. Nasukawa, International committee member, and a secretariat staff attended the meeting.
2015.06.23The 2nd Thailand district meeting has been held on 23rd June 2015 in Bankok.
2015.04.15Mr. Depo Hsu, Chairman of Taiwan Mold & Die Industry Association(TMDIA), and TMDIA members made a courtesy call on JaDMA during the period of INTERMOLD2015. And JaDMA extended a warm welcome to them.
2015.04.15INTERMOLD2015/ Die and Mold Asia 2015/ Japan Metal Stamping Technology Exhibition 2015 has finished successfully on April 15-18, 2015 at TOKYO BIG SIGHT.
The next exhibition INTERMOLD2016/ Die and Mold Asia 2016/ Japan Metal Stamping Technology Exhibition 2016 will be held from 20th to 23rd April 2016 at INTEX OSAKA.
Website for INTERMOLD2015
http://www.intermold.jp/english/
2014.10.28Mr. R. Sree Prakash, Vice President of Tool And Gauge Manufacturers Association-India (TAGMA-INDIA), and his staff made a courtesy call on JaDMA during the period of International Plastic Fair 2015. And JaDMA gave them a hearty welcome.
2014.10.25JaDMA was invited to China Die and Mold Industry Association(CDMIA) 30th Anniversary. Mr. Makino, Chairman of JaDMA, and his staff attended the ceremony. JaDMA send flowers as a sign of celebration.
2014.06.02FADMA Annual General Meeting was held in Shanghai, China. Mr. Makino, Chairman of JaDMA, and secretariat staff attended the meeting.
2014.03.26INTERMOLD2015/ Die and Mold Asia 2015/ Japan Metal Stamping Technology Exhibition 2015
INTERMOLD2015/ Die and Mold Asia 2015/ Japan Metal Stamping Technology Exhibition 2015
will be held on April 15-18, 2015 at TOKYO BIG SIGHT.

Website for INTERMOLD2015
http://www.intermold.jp/english/

If you are interested to visit, please check with the OUTLINE page below.

http://www.intermold.jp/english/outline/